8HR2042M+[93-1000/1]L[F(AP-C),F(AP-CF),F(AP-HC)]M THK Separated Linear Guide Side Rails Set Model HR
| Brand Name: | THK |
| Model Number: | 8HR2042M+[93-1000/1]L[F(AP-C),F(AP-CF),F(AP-HC)]M |
| da: | 174.625 mm |
| Da: | 339.999 mm |
| Ca: | 101.803 mm |
| A1: | 190.5 mm |
| A2: | 276.225 mm |
| S: | 4.763 mm |
| ba: | 78.581 mm |
| H: | 398.462 mm |
| 8HR2042M+[93-1000/1]L[F(AP-C),F(AP-CF),F(AP-HC)]M |
Product Details
| da | 174.625 mm |
| Da | 339.999 mm |
| Ca | 101.803 mm |
| A1 | 190.5 mm |
| A2 | 276.225 mm |
| S | 4.763 mm |
| ba | 78.581 mm |
| H | 398.462 mm |
| H1 | 200.025 mm |
| H2 | 79.375 mm |
| L | 711.2 mm |
| R1 | 120.65 mm |
| R2 | 42.069 mm |
| RG | 1 NPT |
| PG | 1/4 NPT |
| h | 61.913 mm |
| Housing | SSAFS 538 |
| Stabilizing ring | SR-38-32 |
| Labyrinth ring | 2 x LOR 154 |
| End plug (suffix Y) | EPR 21 |
| Bearing limiting speed | 2400 r/min |
| P60° | 416 kN |
| P90° | 249 kN |
| P120° | 151 kN |
| P150° | 136 kN |
| P180° | 160 kN |
| Pa | 52.5 kN |
| Mass pillow block | 223 kg |
| Cap bolt | 1 1/8-7 UNC |
| Cap bolt recommended tightening torque | 1735.4 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 1/2-13 UNC |
| Initial grease fill | 1672.65 g |
Recommended Products
-
6SRS9XS[SS,SSHH,UU]C1+[32-900/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series -
6SRS9XS[SS,SSHH,UU]+[32-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series -
6SRS9XS[SS,SSHH,UU]+[32-900/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series -
6SRS9XN+[42-1000/1]LM THK Miniature Linear Guide Caged Ball SRS Series -
6SRS9XN+[42-1000/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series -
6SRS9XNC1+[42-1000/1]LM THK Miniature Linear Guide Caged Ball SRS Series